Here is how I installed the ports on my XS wing (the a/c is not yet flying
so I can't vouch for the locations):
The port on the top surface of the wing is located 6 inch / 152 mm forward
of the leading edge of the wing spar, and 12-5/8 inch / 321 mm inboard of
the win tip, or alternatively the port is 126-5/8 inch / 3216 mm, measured
outboard from the inboard surface of the root rib.
Best regards,
Rob Housman
A070
-----Original Message-----
From: owner-europa@post.aviators.net
Subject: AOA question
I am installing the Proprietary Software System AOA. I've seen it on
other Europas. Does anyone have any suggestions as to where on the wing
the pressure port should be? I would welcome any other hints and
recommendations that anyone might have regarding this particular AOA
instrument.
Thanks
Jim Gunnlaugson
A192.
|