Hi All,
I forgot one tip:
Lancair IVP builder Jouko Nikko gave me an idea
to wrap well-greased string or cord around the
flange of CS03. This prevents to bond CS05 solid
by flox. Those lower holes in CS04 are so near the tube
itself. Please no grease for bonding surfaces!
Cheers,
Raimo M W Toivio, #417
RWM-SYSTEMS
37500 Lempaala, FINLAND
tel +358 3 3753 777
fax +358 3 3753 100
gsm +358 40 590 1450
www.rwm-systems.fi
raimo.toivio@rwm-systems.fi
----- Original Message -----
From: RWM-SYSTEMS <raimo.toivio@rwm-systems.fi>
Subject: no friction
> Hi All,
>
> few days ago I was asking hints&tips for installing CS02-08 combination.
>
> Brian Fog request me to take care of CS03 and CS07 - they should be
> parallel with CS05. The installation is loose because there must be room
> for Redux. I made a simple jig to hold those items in line.
>
> Bob Harrison also suggested me to drill aerosol can probe injector holes
> into bearings CS04 and CS06. What a wonderful idea!
>
> Thank you boys! I floxed both of the tubes yesterday and everything went well.
> Today I connected aileron control cross link rod between CS08s and my
> sticks operate smooth and beautiful.
>
>
> Raimo M W Toivio #417
> RWM-SYSTEMS
> 37500 Lempaala, FINLAND
> tel +358 3 3753 777
> fax +358 3 3753 100
> gsm +358 40 590 1450
> www.rwm-systems.fi
> raimo.toivio@rwm-systems.fi
>
>
|