Re: Map light

[Tony S. Krzyzewski <tonyk@kaon.co.nz>]

LED Lights...you don't 'need' the cannisters, they were used just to put
the LED's and resistors into something.

For a 3v ANR supply I'd use the following....

                LM2940T-12        Low voltage drop out 12v regulator
        feeding a
                LME1212S         250mW DC to DC converter
                or
                NME1212S        1W Dc to DC converter
        feeding a
                LP2986IM30        3v regulator
                                (any of the 3v regulators will do.

Just check if it's 3v or 3.3v you need. just change the regulator as
required.
Farnell components have all the parts www.farnell.com

Where can you get audio jacks with the extra circuits?

www.aeroelectic.com :-)

Tony