The wings, when clamped in the rigged position, are very close to the
required incidence. Mine were anyway.
regards,
MP
----- Original Message -----
From: <clevelee@cswebmail.com>
Subject: Wing angle of incidence
> Collective Wisdom,
>
> I'm about to go about setting the wing incidence. I am puzzled by an
aspect of
> the mechanics.
>
> The pin busings that were bonded into the cockpit module did not have a
specific
> wing angle of incidence associated with the installation.
>
> Does it really work, that with those bushings already bonded in place, I
can
> expect to rotate the wing spar relative to the outside of the fuselage to
obtain
> the 2 1/2 degrees incidence, and still expect the pin passing through the
> cockpit bushing to slide smoothly into the spar bushings?
>
> What am I not realizing?
>
> Thanks,
>
> Cleve Lee
> Mono XS A198 N396ST
> Detroit, MI
>
>
> ___________________________________________________
> The ALL NEW CS2000 from CompuServe
> Better! Faster! More Powerful!
> 250 FREE hours! Sign-on Now!
> http://www.compuserve.com/trycsrv/cs2000/webmail/
>
>
|