Hi Alex,
This is a common 'problem'. Just heat the can of yellow
stuff in hot water for a while. This will make it all
smooth and lump free. You should only have to do
this once.
regards,
Terry Seaver
A135/N135TD
"Alexander P. de C. Kaarsberg" wrote:
> Has anybody else got lumps in the yellow part of the Redux ?
> The first tin I opened to use turned out to have some lumps, or rather
> flakes a couple of mm's large, a bit like a tin of paint that has been
> left open and then mixed up but it was not only in the surface. Taking a
> portion from the middle of the tin gave the same result. The tin still
> has some years of shelf life....
>
> Alex, XS # 529
>
|