Dave,
This not by my personal experience. However, I was just told of an individual
who was reacting strongly to dust and vapors while building a Long Easy. His
solution was to spray Hair spray on his exposed skin. He says he stopped
reacting.
Ralph
A234
Mono MG
Rob Housman wrote:
> Not to discourage you, but though my reaction to the epoxy has been mild
> compared to yours, I find that the Aeropoxy, Araldite, and so-called 5
> minute epoxy all affect me in a similar fashion. The same goes for the
> sanding dust.
>
> Best regards,
>
> Rob Housman
> A070
>
> -----Original Message-----
> Behalf Of DJA727@aol.com
> Subject: Re: Epoxy allergy
>
> In a message dated 4/29/2002 6:28:05 AM Pacific Standard Time,
> 72016.3721@compuserve.com writes:
>
> > It is possible that it is the particular make of epoxy that is causing the
> > problem. I know of two instances where having had the allergy builders
> > changed to a German make of epoxy and had no further problems.
> >
> >
>
> I assume that the epoxy is suitable for the structural requirements of the
> Europa? I will look into this.
>
> thanks,
>
> Dave
>
|