Hi! Paul.
When my Son forwarded the messages I collected from the UK Online web site
we managed to drop out your e-mail address.
I'm sorry to appear so inefficient.
Would you e-mail me afresh so I can collect your address.
I am presuming you in fact want a mod. kit ? (along with countless others!)
I'm thinking that I will bring them with me to Oshkosh. But if you won't be
attending then I will need your address, and we need to have a plan for the
painfull bit ..... payment !
I'm given to understand there's an "International Tent/Marquee" for those
attending Oshkosh that may be the solution to meet and exchange
goods/checks/Cheques/cash (the latter may be helpfull to me from an
administration view)
Regards
Bob Harrison G-PTAG
-----Original Message-----
Subject: Fw: tailplane torque tube clamps
----- Original Message -----
From: Paul Boulet
Subject: Re: tailplane torque tube clamps
Thanks for the info. No... I have not put the top on yet...my wings almost
ready for close out and my cockpit module should be ready for installation
within a week.
Paul
"Bob Harrison (Sweden)" <ptag.dev@ukonline.co.uk> wrote:
Hi! Paul.
I'll contact you next week when I get back from
Sweden/Finland/Norway/Denmark.!
After you have drilled the nylon bushes you will need to remove 1/8th"
---From the inboard ends, then you can assemble the tube and all the bushes,
but hopefully you haven't yet put your fuselage top on ? You can see
pictures of the clamps and arrangements on the www.crixbin.org. support site
We will contact next week.
Regards
Bob Harrison G-PTAG
----- Original Message -----
From: Paul Boulet
Subject: tailplane torque tube clamps
hi Bob;
do you have info on the tailplane torque tube clamps previously
discussed on forum? I'm putting the torque tube together now and would like
to incorporate this mod. Thanks for your help
Paul Boulet, A212
----
|