Hi! Simon.
You aren't on your own because it needs a little searching for since it is
at the lower end of Fergs Stabilator General Arrangement Drawing and you
need to give that time to down load.
However to avoid confusion I'm copying this procedure on to the forum for
everyone to see.
a)....Connect to web page:- http://www.crix.org.uk
b)....Click on "Modifications - NEW"
c)....Click on "Stabilators.....here"
d)....Allow time for Fergs' Assembly Arrangement Drawing to down load.
e)....Scroll down to "Bob Harrisons' Torque Tube Mod.
Hopefully this will clarify access to the relevant pictures.
Regards to all. Wasn't the new Cranfield PFA Rally so much more a delight to
witness with the
reduction of security and "little Hitlers" wandering around. More akin to
the relaxed rally occassions of our Scandinavian neighbours. ? Pity about
the bloody route march from the Caravan /camping area though, never did find
the bus service to coincide with when I needed them.
Toilet/Shower Block facilities for the Caravan Site were excellent and
what's more stayed clean and tidy for the whole event.
Bob Harrison G-PTAG.
-----Original Message-----
Subject: RE: Tail Plane/Stabilator Drive Train
Enhancement by Clamping.
Hi Bob,
I am interested in this mod - I'm in the process of building the tail-plane
now - but I can't find any info at the web-site you quote. Could you point
me in the right direction?
Best regards,
Simon Miles
Tri-gear #508
-----Original Message-----
From: forum-owner@europaclub.org.uk
Subject: Tail Plane/Stabilator Drive Train Enhancement
by Clamping.
Hi! All.
At long last I can offer the above PFA Approved optional Modification
No.10623 for "all aircraft of type". Subject to acceptable Centre of Gravity
position calculations and proof and authorised inspection on completion.
The sale price of two sets of clamps per aircraft is 190 (plus VAT if
applicable )plus carriage.
It is the responsibility of overseas purchasers to clear customs .
However I expect to be at Oshkosh this year so could deliver for collection
there.
Pictures of the parts and installation are displayed on the Europa Support
site :-
http://www.crix.org.uk
Orders can be accepted now against a pro-forma invoice with settlement prior
to manufacture.
Delivery will be within 4 weeks of receipt of settlement.
Best regards
Bob Harrison G-PTAG
Plantragg Developments
4 Wold View
Caistor
Lincs
LN7 6UU
UK.
Fax. +44 (o)1472 851987
|