Re: NSI CAP 140 Pitch Gauge

[James H. Nelson <europajim@juno.com>]

Requires you to have a backing plate with three slip rings.  Then you can
utilize the readout that NSI provides.


                                                                         
                                    Jim Nelson
                                                                         
                                      N15JN


<kevin@ukmicrolights.com> writes:
> Stuart,
> 
> I didn't realise you could get a pitch gauge for the prop. I would 
> be very
> interested in retrofitting one if it not too much hassle.
> 
> Regards
> Kevin
> 
> -----Original Message-----
> From: forum-owner@europaclub.org.uk
> Jr.
> Subject:  NSI CAP 140 Pitch Gauge
> 
> 
> I am interested in bench test procedures to verify proper operation 
> of the
> instrument panel pitch gauge for the NSI CAP 140 propellor kit. I am 
> using
> this unit on a Rotax 912 in a Kitfox, with erractic functionality 
> from the
> guage itself.
> Stuart
> 
> The Europa Forum is supported by Aviators Network UK 
> <info@avnet.co.uk>
> 
> ---
> Version: 6.0.381 / Virus Database: 214 - Release Date: 02/08/02
> 
> ---
> Version: 6.0.381 / Virus Database: 214 - Release Date: 02/08/02
> 
> The Europa Forum is supported by Aviators Network UK 
> <info@avnet.co.uk>
>