If you contact Airmaster (aerotrad@ihug.co.nz) they'll send you the diagrams.
The controller itself is a standard 2 1/4" instrument. Recommended hole size
is 2 5/16"
The switch is 35(v) x 19(h) and has 3.5mm radiused corners. Two 3.7mm holes
(#27 drill) are located 47.1 mm apart along the vertical centre line with the
holes equispaced from the top and bottom edges of the hole.
Tony
Quoting Steve Hagar <hagargs@earthlink.net>:
>
> I am laying out the holes that I am throwing money into on Auto CAD
> for
> the aluminum sub panels. I haven't bought the Airmaster yet. Does
> anyone have the hole pattern for the controller and its associated
> switch
> that they can get to me?Thanks,Steve HagarA143 Mesa, AZ--- Steve
> Hagar---
> hagargs@earthlink.net
> The Europa Forum is supported by Aviators Network UK
> <info@avnet.co.uk>
>
|