Tony,
Are you trying to get the correct alignment between the flap bracket and the
bracket that attaches to the wing? If so I made up a spacer out of some 6mm
aluminum. It does a much nicer job than bending W19, besides putting a
small set in the bracket also makes it slightly shorter which is
undesirable.
Cheers, Paul
----- Original Message -----
From: "Tony Renshaw" <tonyrenshaw@ozemail.com.au>
Subject: Flap to Wing advice ????
> Bob,
> I have been looking at a home page today that mentions the "double bending
of
> the W19 hinge plate at the inboard end of the classic wing. Can you please
send
> me a detail of the "now approved fix" ( quoted on the home page) as this
is the
> stage I am up to. Thank you in anticipation. If it is any easier or more
> convenient my fax no is 61-2-99403342 (GMT +10)
> Reg
> Tony Renshaw
> Sydney Australia
>
> >Hello all,
> >For everyone building or interested in building Europas who are attending
> >Sun n Fun, Flight Crafters will be hosting an open house on Sunday April
7th
> >from 4 to 8pm. Snacks and refreshments included.
> >
> >Several aircraft in various stages of construction will be available for
> >viewing. If your just starting your project or are interested in
building
> >one, now is your chance to see building in progress. Meet your fellow
> >builders and talk Europa all you want!
> >
> >Directions: From the Sun n Fun Main Entrance, go West on Medulla Rd.
to
> >County Line Rd. Turn Right and go North to I-4. Proceed West on I-4 to
> >Exit 8 which is Hwy 579. Go South on 579 one block to Hwy 92 and turn
left.
> > Go East on Hwy 92 1 mile to Parsons Rd. and turn right. Go South 1/4
mile
> >to large metal tan colored building on your left.
> >
> >If you are unable to attend on Sunday, please feel free to give use a
call
> >at 813 655-6411 and make arrangements for another day. Generally we are
> >there during daytime hours but due to Sun n Fun we may be at the show as
well.
> >
> >Regards to everyone,
> >
> >Russell Lepre & Bob Berube
> >Flight Crafters
>
> Reg
> Tony Renshaw
> Builder No.236
>
|