Hi! Ian.
You are most probably correct but if you have the "Crowbar " protection who
needs the blessed slow blow fuse which you won't be able to have a try at
"reset" anyway.?
regards
Bob Harrison. G-PTAG
-----Original Message-----
From: forum-owner@europaclub.org.uk
Subject: Re: Slow Blow Fuse
Bob
May I suggest you have another think about your comments re starting. The
30amp slow blow fuse should be in the supply from the regulator not be in
the starter circuit.
Ian Rickard #505 G-IANI
e-mail ian.iicons@ntlworld.com
-----Original Message-----
From: forum-owner@europaclub.org.uk
Subject: Re: Slow Blow Fuse
Hi! Dave.
Why don't you forget the slow blow fuse and fit a "crow bar protection
Mod."? then just have the
solenoid isolater . I also was sick of blowing fuses due to start up loads,
so eliminated the slow blow fuse, although with the gear box reduction on
the Rotax you'll not be pulling the load required to start the direct drive
Jabiru 3300 six pot.
Regards
Bob Harrison G-PTAG
-----Original Message-----
From: forum-owner@europaclub.org.uk
Subject: Slow Blow Fuse
Hi,
One of the components that is driving me crazy is the "30 amp slow blow
fuse"
called out in the Europa electrical system! I can't seem to find the darn
thing! I have an 8 am fuse, but can't find higher.
What are people using for that and any ideas where I could get one or more?
Thanks,
Dave Anderson
A227
mini U2
|