Re: Top Gloss Finish

Subject:	Re: Top Gloss Finish
From:	Graham Singleton <grasingleton@avnet.co.uk>
Date:	Fri, 11 Oct 2002 00:17:51

>Imron or similar by a professional.  IMHO, with proper precautions, Imron or
>PPG or such will likely be a better finish and not kill you during the spray
>process.
>Ken Carpenter
>A123  N9XS   Mono 914

Agreed Ken,
I suspect that the PPG will be easy to touch up if dinged whereas the Imron 
may be very difficult. Much cheaper too.
Graham

<Prev in Thread]	Current Thread	[Next in Thread>
Re: Top Gloss Finish, Dale Hetrick Top Gloss Finish, DJA727 Re: Top Gloss Finish, Jim Brown Re: Top Gloss Finish, PreDial Re: Top Gloss Finish, DJA727 Re: Top Gloss Finish, Jim Brown Re: Top Gloss Finish, kbcarpenter Re: Top Gloss Finish, Graham Singleton <= Re: Top Gloss Finish, Fred Fillinger Re: Top Gloss Finish, Rowland & Wilma Carson Re: Top Gloss Finish, Tony Krzyzewski Re: Top Gloss Finish, Tim Ward Re: Top Gloss Finish, McFadyean

Previous by Date:	Re: LEATHER CONTROL COLUMN BOOTS, Tim Ward
Next by Date:	Re: Re - Poly Fiber Top Gloss, Fred Fillinger
Previous by Thread:	Re: Top Gloss Finish, kbcarpenter
Next by Thread:	Re: Top Gloss Finish, Fred Fillinger
Indexes:	[Date] [Thread] [Top] [All Lists]