Re: Rudder pedal travel

[Tony S. Krzyzewski <tonyk@kaon.co.nz>]

"........haven't seen any need to put them in the forward set. There is
nothing to tighten them against except the springs on the pedal shaft
and the amount of possible adjustment won't do much to vary the pedal
angle to accommodate different leg lengths. "

There is another good reason to add turnbuckles in the cables and that
is one of inspection. With turnbuckles in the cables it is possible to
undo them and draw the cables forward away from the pulleys to look for
wear at your 100 hour checks.

Tony