Dale,
Back in April of '92, when I was rebuilding/recovering my Emeraude, I purchased
a Croix CX-9 Turbine, 25 extra feet of hose (to put the unit outside the spray
area), a Willson 'head gear' with a 1.2 needle nozzle and .07 aircap.
I was spraying Hipec (Endura is the industrial name for the paint - Canadian
supplier)
In 10 years of flying I've not had one flex of paint come loose from the plane.
But I digress.
The supplier back then for the spray system and components was Aircraft
Restoration Supplies out of Elko MN. Their phone number was 612-461-2224 or
800-325-5464. I just checked the 800 number at 8:00 pm and got a 'please leave
a message at the tone' - so don't know if it is current or not.
Hope this helps.
Cleve
A198 Mono XS Jabiru 3300 N396ST
Detroit, MI
>
> Clive,
> Where did you obtain the "Y" fitting, Air Mask, etc.?
> Thanks
> Dale
> #A140
> The Europa Club website is at <<a
href="http://mail.cswebmail.com/jump/http://www.europaclub.org.uk>">http://www.europaclub.org.uk>;
The ALL NEW CS2000 from CompuServe
Better! Faster! More Powerful!
250 FREE hours! Sign-on Now!
http://www.compuserve.com/trycsrv/cs2000/webmail/
|