....not quite so, the tension is merely adjusted a tad by rotating the
loop a few degrees- friction between cable and nylon sleeve holds it in
place and the lockwire makes sure it won't slide back....
In the worst case the wire breaks and allows the arm to go a few mm's
off to the side..
Alex
Tony S. Krzyzewski wrote:
>
>
>Of course if you mean that the cable is still secured with nicopress
>sleeves but is tensioned with lockwire then you can ignore the nicopress
>sleeve question and ask him if safety wire is enough to tension the arm.
>:-)
>
>Tony
>
>Esta mensagem foi verificada pelo E-mail Protegido Terra.
>Scan engine: VirusScan / Atualizado em 16/10/2002 / Verso: 1.3.13
>Proteja o seu e-mail Terra: http://www.emailprotegido.terra.com.br/
>
|