I made a plate from a piece of stainless sheet (offcut from the piece
supplied to make the retract lever bracing strut).
I then took it to the local engravers who engraved the registration number
onto it - cost 5.00.
I have some spare sheet if you need a piece. My plate measured 2"x 1".
Carl Pattinson
G-LABS
----- Original Message -----
From: "Michael Parkin" <Mikenjulie.Parkin@btopenworld.com>
Subject: Placard
Does anyone have a source for the stainless steel a/c no/Registration plate
required by the PFA.
regards,
Mike Parkin No 312 (G-JULZ)
mikenjulie.parkin@btopenworld.com
|