Hi Andy That's fine. I'll leave it to you. Jerry
Jerry@ban-bi.com or LTS@avnet.co.uk
www.Ban-bi.com or www.avnet.co.uk/touchdown
----- Original Message -----
From: "Andy Draper" <andy@europa-aircraft.com>
Subject: Re: Sub panels
> Dear Jerry,
>
> We have recently introduced lazer cut light-alloy panels for both mono and
tri-gear Europas and these are provided with all the necessary fasteners
too. For the engine panel there's the option of the standard round VDO
instruments or the Rotax Flydat. We also do blanks for the avionics and
flight instrument panels for those who may wish to set their panel out
differently to our designs. I doubt that you'd receive the Europa
newsletter, but details were shown in the last issue, No. 35.
>
> As an aside, we have just started to produce the tooling for a long
over-due dedicated instrument module for the Tri-gear Europa. So those who
are building the tri-gear will soon have to option to have a module without
the recess for the mono-wheel's gear retraction lever.
>
>
> Regards
> Andy
>
>
> >>> "LTS" <lts@avnet.co.uk> 11/14/02 08:44am >>>
> Some time ago there was some chat on the group about sub panels and laser
> cutting. I subsequently spent some time on my PC and have my A/C panel on
> AutoCAD and now laser cut. As a result I have several standard cut outs
that
> I could easily develop into a Europa sub panel if people were interested.
To
> make them cheap they need to be the same. Could easily be standard six
> instruments + engine instruments + fuel gauge for example. Any body
> interested?
>
> Jerry
> Jerry@ban-bi.com or LTS@avnet.co.uk
> www.Ban-bi.com or www.avnet.co.uk/touchdown
>
>
|