914 Installation Manual Errors

[Ian Rickard <ian.iicons@ntlworld.com>]

Rotax have just confirmed to me that there are two errors on page 86 of the
914 Installation manual.  The correct connections for the two lights are

Warning Light    Ground (0)  Pin 10 on TCU plug
                                12V  Pin 28 on TCU plug

Caution Light    Ground  (0) Pin 11 on TCU plug
                                12V  Pin 35 on TCU plug

The polarity is reversed in the manual.  The manual will be corrected as
soon as possible.  The polarity is only important if        an LED is used 
(rather
than a filament lamp).


Ian Rickard  #505 G-IANI
e-mail ian.iicons@ntlworld.com