I used Krylon Speckle paint with a clear sealer over the top. I got it from
the local hardware store in aerosol cans. For the instrument panel I used
Zolatone (black on black) which you can get from AC Spruce. It needs to be
sprayed. I used a HVLP gun with a 2mm nozzle and it worked quite well.
You can see the results I got on my WEB page at
http://euroa363.versadev.com. Take a look at the last couple of months.
Paul
----- Original Message -----
From: <DvdPar@aol.com>
Subject: Speckle Paint
>
I have seen something in the past where builders have used a speckle
paint in
> the footwells - for hard wearing properties - has anyone any information
to
> confirm this and also where can I get it and how do you apply it - brush,
> spray?
>
|