As I have said before
You will need 100 feet or mare of 22 AWG. 11 CENTS a foot from Spruce, less
10% for more than 100 feet
20AWG is 14 CENTS a foot.
You pays your UK money or your US money - which gets the best deal ?
Buy all your cable in one go and save . Better still have it delivered
to a US friend who is coming over !
Richard
Trim Installation today
Richard F.W. Holder 01279 842804 (POTS)
Bell House, Bell Lane, 01279 842942 (fax)
Widford, Ware, Herts, 07860 367423 (mobile)
SG12 8SH email : rholder@avnet.co.uk
PA-28-181 : Piper Archer : G-JANA, EGSG (Stapleford)
Europa Classic Tri-gear : G-OWWW, being built.
> From: "M.J. Gregory" <m.j.gregory@talk21.com>
> Date: Mon, 20 Jan 2003 23:55:17 -0000
> Subject: Re: electrical wire spec.
>
> Rayfast (tel 01793 616700, fax 01793 644304) is one supplier in Swindon, UK.
> I spoke to their sales department this morning. They receive Raychem cables
> on 300 m reels and will resell it to you by the m. Currently they have the
> 44A081X- (600 volt) airframe wire (medium) series in stock in the following
> sizes: 10, 12, 16, 18, 20 and 22 AWG.
>
> The 20 AWG could be supplied for 68p/m plus VAT and carriage (?6.50 for next
> day delivery). The 12 AWG would be ?2.30/m + VAT. I do not know how these
> prices compare with other suppliers or with other types of airframe wire. I
> would recommend that you avoid anything described as "primary wire" or
> "equipment wire", however much it might be described as "high performance",
> except perhaps for signal cables suitably wrapped in bundles within the
> panel. While you may get primary wire in a variety of colours, airframe
> wire is normally supplied only in white.
>
> You could try the successor to R D Aviation at Kidlington for a price
> comparison: I know they used to supply wire by the m, but I don't know if
> they used proper airframe wire.
>
> Hope this helps.
>
> Mike
>
> -----Original Message-----
> From: forum-owner@europaclub.org.uk
> Carson
> Subject: Re: electrical wire spec.
>
>
>
>> the Raychem 44 airframe wire - medium weight 600 V, Raychem
>> part number 44A081X- series in 20 AWG size has an outside diameter of 1.78
>> mm and weighs 7.91 g/m.
>
> - and it's available from ....?
>
> regards
>
> Rowland
>
>
|