Dave, Can you share with the list the part number of the mounts, and
where / how you purchased them? Also, how big of a job was it to swap
them out?
Regards,
Garry V. Stout
District Manager, Finance, AT&T Business Services
Phone: 813-878-3929 Fax: 813-878-5651
E-Mail: garrys@att.com
.....taking a "business as usual" approach to the way things are managed
at AT&T is not appropriate. D. Dorman 1/16/03
-----Original Message-----
From: DJA727@aol.com [mailto:DJA727@aol.com]
Subject: Europa-List: Night and Day
For those interested, I have run the 914 engine with the O200 engine
mounts
installed. I had to make some adjustments to various clearance items in
the
cowl to allow for additional engine motion during start.
All I can say is that the difference is remarkable. One thing I had not
thought of was the reduction in the noise level. Vibration is way down
and
the noise level appears to be as well. I have no quantitative
measurements,
but the engine sounds almost turbine like in its smoothness. I look
forward
to having the prop balanced on top of this mount change.
Dave
A227
Mini U2
|