I don't think Ralph is working form plans, but is
making the plans as he goes. I will talk to him and
find out for sure.
Kingsley has sent a picture of his enclosed trailer
which is what I would really like to do but I only have
garage space available on my small in-town
property...the CC&Rs prevent me from keeping a trailer
on the street in front of the house.
Terry Seaver has suggested that I might be able to
borrow an open, mono-wheel trailer from him and Dave.
That gives the opportunity of taking a few hours for
measurements and pictures to share. I could just as
easily do it at their hanger which is only a 2 hour
drive away since I would have to go there to retrieve
it...providing Terry and Dave have the time.
If Rob Neils is willing to share the plans for his
flat-bed tri-gear trailer, and Kingsley for the
enclosed version...that covers everyone.
I would like to make sure there is a way of taking all
of the protrusions off the top and mounting a sheet of
plywood to use the trailer for other light hauling
duties. Possibly even adding mounting bosses for a
second axle since the main axle is set quite far back
to compensate for the weight of the engine at the far
back end of the trailer.
Dean Wiegand
Sacramento CA USA
dwiegand@surewest.net
kit A259
www.dwiegand.dnsalias.com/europa/
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On
Behalf Of tom
Subject: Re: Europa-List: Trailers
<beecho@fix.net>
Hi Kevin, Dean, Bob, Ferg and Rob
Thanks for your replies. I need a mono trailer and I
have never seen one
nor know of one to copy. A number of them have been
custom built so there
must be plans and specs somewhere. Yes, I think that
if a number could be
ordered, a significant savings in $$ can probably be
made.
Ferg, thanks for your offer. I am still hoping to get
specific plans. If
not, I will contact you. Dean, do you know if Ralph
has plans or can you
copy his? I suspect that there are many others in
need. Aren't there 15+
Europe's being built in California alone? (I am in
Atascadero)
Bob and Rob: I need a mono trailer but Dale Hetrick
needs a tri and I am
sure that he will be most interested.
Tom@MonoXSJabiruAerocarbAirmasterN96V.com
----- Original Message -----
From: "Kevin Klinefelter" <kevann@gte.net>
Subject: RE: Europa-List: Trailers
Klinefelter" <kevann@gte.net>
>
> Or several could be made here, probably for a lot
less than $3500 each. I
am
> in need also, Tom
> Kevin Klinefelter
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com]On
Behalf Of tom
> To: europa-list@matronics.com
> Subject: Europa-List: Trailers
>
<beecho@fix.net>
>
> Does anyone have plans for either a monowheel trailer
or a triwheel
trailer
> that they are willing to share? It seems silly to
ship a trailer part way
> around the world to the Western Colonies when one can
be custom made here.
>
> Thank you
> Tom Friedland
> beecho@fix.net
>
>
=================
Contributions
any other
=================
messages.
members.
=================
http://www.matronics.com/subscription
http://www.matronics.com/FAQ/Europa-List.htm
http://www.matronics.com/browse/europa-list
Digests:http://www.matronics.com/digest/europa-list
http://www.matronics.com/europa-list
http://www.matronics.com/contribution
=================
|