Tony,
YES YES YES!!!!!! There will be fuel vapor coming out of the
plastic. Jimmy Thursby tried it and got "burned" for the effort. If you
fill the tank completely with water you will stop most of the vapor
problem. Try drilling and filing the hole to get it.
Jim Nelson
<tonyrenshaw@ozemail.com.au> writes:
> <tonyrenshaw@ozemail.com.au>
>
> Gidday,
> I am wondering after reading Paul McAllisters website about the
> recommendations for preping the fuel tank before I attack it with
> my
> soldering iron to install the Europa fuel probe (magnetic). The
> question is
> that I was only going to drain it of fuel and wash it out with
> water, but I
> now fear that I need to do more than that. Does the plastic absorb
> some of
> the fuel that would make things dangerous for me if I keep to my
> original
> plan?
> Reg
> Tony Renshaw
>
>
>
>
> ==========================
>
>
>
>
>
>
|