I took care to slightly offset the flat heads' and round heads' location
---From each other after one of them hit.
Troy
-----Original Message-----
From: James Nelson <europajim@juno.com>
Date: Wednesday, March 12, 2003 7:18 PM
Subject: Re: Europa-List: door hinge fitting
>
>Paul,
> Trust the design, It works well. I have no interference. The
>reason for flat and round is you cannot use round head screws in both
>places.
>
>Jim
>
>
><paul-d.stewart@virgin.net> writes:
>> <paul-d.stewart@virgin.net>
>>
>> Just been fittin the doors and their hinges this evening. Cant quite
>> see why
>> the side attached to the door is attached with countersunk screws
>> and the
>> side attached to the fuselage with AN 525-10R10 dome headed screws.
>> It seems
>> the door becomes hinge bound as it closes as the head of the AN525
>> is too
>> proud of the hinge. Anyone had similar experience or (as I'm
>> thinking of
>> doing) replacing them with countersunk versions.
>>
>> Regards
>>
>> Paul Stewart #432
>>
>>
>>
>>
>> ===============
>>
>>
>>
>>
>>
>>
>
>
|