We glassed a small 'U' shaped piece of blue foam onto each door to be used as a
finger grip, located on top of the door sill, just below the bottom of the
plexiglass window, about mid-door, fore and aft. the 'U' shaped foam is about 3
inches wide, by about 1 inch high, by about 0.5 inches thick at the base.
regards,
Terry Seaver
A135 / N135TD
Richard wrote:
>
> Hello the forum.
>
> I have just completed my upholstery and refitted the door rubbers for (I
> hope) the final time. I can close the doors from the outside reasonably
> easily but can't find a way to close them from the inside without
> assistance. I did consider fitting a knob towards the aft end of the door
> as an aid to pulling this closed so that I can shoot the bolts. Anyone done
> this or any other suggestions to DIY door closing?
>
> Richard Iddon. G-RIXS (final inspection complete, now waiting for permit to
> test)
>
|