Europa-List: Post Cure time?

[Ronald J. Parigoris <rparigor@suffolk.lib.ny.us>]

> Reading in my manual, it speaks of postcuring of flying surfaces between 40
> and 50 degrees C  (104 and 122F) for 8 to 10 hours prior to paint to flash off
> volatiles and humidity and improve strength.

The manual was written for use with SP Systems Ampreg 20.

Is post cure the same duration and temperature as listed in manual when using
Aeropoxy?

What components are not necessary to post cure?

Thx.
Ron Parigoris