Gidday,
I have recently installed the fuel tank gauge, the magnetic variety
supplied by Europa. Upon tightening the 5 anchor nuts I notice that after
some time, a few weeks or so, there is a noticeable gaping between the tank
and the underside of the top flange which the rubber seal sits against. In
other words, it is not equally sealing and I am wondering now if I should
use a tank sealant. I need advice of the best type of sealant to suit the
rubber gaskets, and the poly tank. I gather any fuel tank sealant will be
adaquate, but would like advice as to which product is recommended.
Reg
Tony Renshaw
Sydney Australia
|