I have the rudder cables connected to the rudder pedals as per plans. The
cables run straight from the CS21s to the cable pulleys. They skim the walls
and clear everything. I put the gear with wheel and brake on, and retracted,
still the cables clear. If I build the cable guides per plans the cables will
rub on the blocks and rub on the walls in several places. (it's the walls
that are the problem) I think I'm going to keep the cable straight and not
have the cables pulled outwards. The guides will be only 5 mm taller, I can't
think of anything that will rub on or hit them later on. I'm I missing
something?
Thanks,
SteveD.
|