Many thanks for all the good advice regarding the Icom ICA200. The lack of
support for the unit has persuaded me to dig deeper into my pocket and
switch to the Becker radio and transponder. All of the data on wiring,
accessories, setting up, operating and maintaining is readily available on
the internet. The radio includes an OAT gauge which will save me a small
amount!
Now on my 6th panel redesign (using the experimental panel designer web
site, which is not quite accurate enough for final fitting)- fun isn't it?-
until you have to pay for the goodies.
Brian Davies kit 454
----- Original Message -----
From: "Graham Singleton" <graham@gflight.f9.co.uk>
Subject: Europa-List: Icom IC A200
<graham@gflight.f9.co.uk>
>
> >From: "Brian Davies" <bdavies@dircon.co.uk>
> >Subject: Europa-List: Icom IC A200
> >
> >
> >Does any one know of a UK supplier for the Icom IC A200 transceiver? I
know I
> >can get it from the US but it would be nice to have UK supplier support.
> >
> >Brian Davies kit 454
>
> Brian
> there was a question re approval in the early days, but only because some
> people wanted to use the ICOM A200 as a base station and CAA didn't like
> that. It is approved for airborne use. I have no idea what it's
performance
> is like.
> Graham
>
>
> ---
>
>
|