Re: Europa-List: Primer for Zn-coated steel

[DuaneFamly@aol.com]

I concur with Rob on the tubes being aluminum. Your magnet test will be 
conclusive. I chose to take most of the tubing from the kit and sent it out to
be 
powder coated. They will clean and coat it and you should never have a problem.

You can also pick a nice color. The cost to me was about $80 US and three 
days time. Make sure you mask off the bottom of the control sticks where they go

into the CS01 with CS16b spacer. It's a snug fit to begin with.

Mike Duane A207
Redding, California
XS Trigear