Tightness\Lubrication
David,
OK, sounds good to me. Thanks.
Reg
Tony Renshaw
Sydney Australia
>
>Tony, You simply put a little light oil on the tube before mounting the
>tailplane - no need to complicate it! David
>----- Original Message -----
>From: Tony Renshaw <tonyrenshaw@optusnet.com.au>
>To: <europa-list@matronics.com>
>Subject: Europa-List: Torque Tube Bronze Bushing Tightness\Lubrication
>
>
><tonyrenshaw@optusnet.com.au>
>>
>> Gidday,
>> I am about to install my torque tube after having the pins replaced to the
>> larger option. I have noticed that the bronze bushings are very tight on
>> the tube. Is this normal?? Also, I am wondering if people have set up
>these
>> bearings for future lubrication? I do recall someone setting up for
>> injection of a light lubricant, and now is the time for me to consider
>> this. Any other suggestions with this setup will be kindly appreciated.
>> Reg
>> Tony Renshaw
>> Sydney Australia
>>
>>
>
>
|