Hi Nigel,
Thanks very much for last Tues. I have bought an appropriate resistor and
will sort the crowbar out at the next opportunity. I found my 24 pin plug
connection list for one of two that I installed to remove the panel and both
connections to the "no charge" LED are included. I therefore should be able
to complete the circuit without removing the panel. I probably coiled the
missing wire behind the fire wall inspection hatch. One more problem - the
LED has + & - connections which I can identify from the plug pins, but it is
not obvious to me which way round it should be connected at the rectifier.
i.e. + or - to terminal "L". Can you help me with that?
Best wishes,
William
----- Original Message -----
From: "Nigel Charles" <nigelcharles@tiscali.co.uk>
Subject: Europa-List: e-mail address list
<nigelcharles@tiscali.co.uk>
>
> Having had a recent problem with Windows ME I finally took the plunge and
installed XP having backed up what I thought was all my essential files.
Unfortunately this did not include my e-mail address list.
>
> Could anyone who regularly contacts me by e-mail send a brief reply to
this message so I can re-establish a basic address list.
>
> Thank you.
>
> Nigel Charles
>
>
|