>
Attention Steve Dunsmuir,
Sorry to have to use the list but I have bounced mail and this is the only way
to get the message through.
Steve,
Yesterday I sent you a picture of my setup for my trim T piece slots. I used
the reply button to your personal e-mail to me, so I believe I have the right
address. Would you mind e-mailing me again so that I can verify address, and
for info the returned mail stated.....Permanent Fatal Errors.
Reg
Tony Renshaw
Sydney Australia
>
> from mail023.syd.optusnet.com.au [210.49.20.162]
>
> ----- The following addresses had permanent fatal errors -----
> <ScramIt@aol.com>
> (reason: 554-(RLY:B1) The information presently available to AOL
> indicates this)
>
> ----- Transcript of session follows -----
> 554 5.0.0 Service unavailable
> Reporting-MTA: dns; fallbackmx01.syd.optusnet.com.au
> Arrival-Date: Sun, 17 Aug 2003 18:52:00 +1000
>
> Final-Recipient: RFC822; ScramIt@aol.com
> Action: failed
> Status: 5.5.0
> Remote-MTA: DNS; mailin-02.mx.aol.com
> Diagnostic-Code: SMTP; 554-(RLY:B1) The information presently available to
> AOL indicates this
> Last-Attempt-Date: Sun, 17 Aug 2003 23:02:07 +1000
> Return-Path: <tonyrenshaw@optusnet.com.au>
> Received: from mail023.syd.optusnet.com.au (mail023.syd.optusnet.com.au
> [210.49.20.162])
> by fallbackmx01.syd.optusnet.com.au (8.11.6p2/8.10.1) with ESMTP id
> h7H8q0X02810
> Received: from SONY (c211-28-252-210.thorn1.nsw.optusnet.com.au
> [211.28.252.210])
> by mail023.syd.optusnet.com.au (8.11.6p2/8.11.6) with SMTP id
> h7H8ohh17762
> Message-Id: <4.1.20030817183651.00f5c938@mail.optusnet.com.au>
> X-Sender: tonyrenshaw@mail.optusnet.com.au
> X-Mailer: QUALCOMM Windows Eudora Pro Version 4.1
> Date: Sun, 17 Aug 2003 18:50:40 +1000
> To: ScramIt@aol.com
> From: Tony Renshaw <tonyrenshaw@optusnet.com.au>
> Subject: Re: Tailplane pitch
> In-Reply-To: <149.17010e81.2c6fa87c@aol.com>
> Mime-Version: 1.0
>
> Steve,
> Thanks for the offer to compare with yours. Here is the requested photo. I
> look forward to your comparison and some dimensions. My dimensions should be
> clear from the photo, but just in case they aren't, my slot ends 55 mm from
> the top of the joggle, and 210 mm respectively.
> Reg
> Tony Renshaw
>
>
>>
>> I went out to look at my setup, I can't imagine having to slot up to the
>> joggle. I have the slots cut per plans a can range greater than +12 -4.
>> Please send photo's with a ruler in them. Something sounds very wrong. I
>> will post any pictures you guys need on my site"
>> http://homepage.mac.com/sdunsmuir/Europa.html
>> In the back of the boat section.
>> Send PICS of what you want to see and I will match your photos with my
>> setup.
>>
>> Hope I can help,
>> SteveD
>
>
|