>
>Tony et al:
>I had a quick look in passing, and guess my slots stop about 1/2" below the
> joggle - and I have 13deg of travel. I can send all my calcs for this
> exercise as I mathed the travel angles through from the trim motor.
> Ferg
There's one other thing to watch out for, at least on early Classics; with
the elevator in full up position and the trim at full nose up, check that
the Tee bar doesn't strike the end of its own bellcrank. I think this was
caused by the Mac servo being a bit low and may have been corrected later
in the plans?
Graham
---
|