In the process of installing the cooling duct for the 914. . . Pretty
much straight forward until the instructions are read: "The assembled duct
is fitted to the footwell using three bolts each side". Two sentences
later. "A single AN3-5A bolt screws the side of the duct onto the inside
face of the footwell using MS21047-3 anchor nut etc . . . " Page 4-2 of
firewall forward manual. So what is it 1? 3? or 1 + 3? = 4?. I would
normally go with the conservative and put 3 in . Is there something I'm
missing with the call out of the single bolt?
Thanks.
Steve
A143
Mesa, AZ
--- Steve Hagar
--- hagargs@earthlink.net
|