>"paul stewart" <paul-d.stewart@virgin.net>
>Subject: Europa-List: pin holes
>Having thought we were doing quite well with a 6HP vacuum to reveal pin holes,
>the application of a compressed air blower has revealed yet more of the little
>b*****s. Are we correct in continuing to fill and sand until the last pin hole
>is banished or does primer take care of the odd one or two?
>Paul Stewart #432
Paul
I suggest you get hold of a can of Akzo Aerodur brushing primer. THe
technique is brush it on thick, leave 10 minutes , then squeegee it off
again. This will fill the pin holes although it might need a second
application.
The factory used to stock it, if not ask Colin Noaks or the UK office.
How's your back BTW?
Graham
---
|