Mike,
Apologies for the slow response - it's been a long week and I'm only just
catching up...
I'm fitting the DigiTrack 2-axis and am planning on fitting the pitch servo
behind the cockpit module, driving a pushrod forward alongside the steam
pipe - sorry, pitch pushrod - and connecting to the pitch torque tube via a
longer AN5 bolt in single-shear through the existing lugs.
Hope that helps.
Regards,
Jeremy
Jeremy Davey
Europa XS Monowheel 537M G-EZZA
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of mike toft
Subject: Europa-List: S-tec System 30 Autopilot
Hi All,
I am fitting the S-Tec System 30 Autopilot to my XS Tri-Gear - that is the 2
axis autopilot - has anyone fitted this to their Europa - and if so what
bracket system did you use as the kit doesn't come with any installation
system. The roll control I am going to fit under the pilot's seat with a
horn attached to the CS05 Torque tube - using a hatch cut through the top of
the seat - but I'm not sure quite where to attach the altitude hold servo -
any ideas?
Regards
Mike Toft
XS Trigear 510
South Africa
|