on 9/24/03 1:11 AM, R.C.Harrison at ptag.dev@ukonline.co.uk wrote:
>
> Hi! Mike.
> The cables run under the pulleys and they need a packer sliding under to fit
> close but not touch thepulley to ensure the cable doesn't jump off. You also
> need to insert the harness bolts prior to fitting the pulley and washer pack
> the pulleys inboard to ensure they rotate without hitting the bolt heads.
> Regards
> Bob Harrison G-PTAG
>
> PS Can't help on the dissimilar metals problem.
>
>
>
>
>
>
Mike,
I also put the rudder cables into conduit from the firewall to the pullies.
That way you don't have to worry about any rubbing anywhere. You can redux
them to the front and back areas.
Jeff
A258 Tri
|