Brian.
All my a/c was built using the Ohaus 200 model. I haven't got it to
replicate the recommended test at present since I've lent it out. I don't
see a problem .....unless you leave it too long standing after you have
zero'd the scale then it resets itself which if you didn't notice could
cause a problem, I never had it reset on me during a mix yet. It takes about
3 to 4 minutes of inactivity before it resets but by then you have certainly
put the resin shot in to a known figure so if it self zero's all you do is
put the required ammount of hardener in to a known figure.
Regards
Bob Harrison G-PTAG Europa MKI/Jabiru 3300
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of
EuropaXSA279@aol.com
Subject: Re: Europa-List: Caution for those using Electronic Scales ?
Mix info
I wonder if any of you fine folks that have chosen an electronic scale could
try this test. I have yet to purchase one but will soon. Speaking with my
new
friend Jeff on Thursday night, I had thought of purchasing the Ohaus c200.
Can anyone make a brand and model recommendation that can pass scrutiny?
Much thanks.
Brian
|