Re: Europa-List: Fitting Rudder Pushrod Fitting CS29

[Kingsley Hurst <hurstkr@growzone.com.au>]

Jim Butcher wrote:

> We have trimmed the port side of the rudder to give the push rod clearance
to the point that if we trim further the opening will be visible when the
rudder is at neutral.

Jim,

I have just recently installed this mod myself.  7mm of the slot for my push
rod is visible with neutral rudder and this allows me to get 31 degrees of
rudder movement to Port.


Regards
Kingsley Hurst
Mono Classic 281 in Oz