The bolts used to attach the engine to the landing gear frame are
described as both AN5-40 and AN5-41 in my copy of the build manual. I
have got AN5-40 with my kit although they seem a little on the short
side as when fully compressing the lord mounts I still cannot see the
bolt drilling for a split pin. Can anyone remember what mounting bolts
they have (XS 914).
Chapter 3 of my build manual tells me to cut the sheet steel for the oil
tank mounting bracket as shown in the diagram at the end of the chapter
- does anyone have such a diagram 'cos I 'ain't.
Regards
Paul Stewart #432
<META content"MSHTML 6.00.2800.1226" nameGENERATOR>
<STYLE></STYLE>
The bolts used to attach the engine to
the landing
gear frame are described as both AN5-40 and AN5-41 in my copy of the
build
manual. I have got AN5-40 with my kit although they seem a little on the
short
side as when fully compressing the lord mounts I still cannot see the
bolt
drilling for a split pin. Can anyone remember what mounting bolts they
have
(XS 914).
Chapter 3 of my build manual tells me
to cut the
sheet steel for the oil tank mounting bracket as shown in the diagram at
the end
of the chapter - does anyone have such a diagram 'cos I
'ain't.
Regards
Paul Stewart #432
|