Bob,
Did Cliff ever perfect a way to use your servo with the MAC (ray allen)
stick grip switches. If so, I would be interested in details. Wait...was
that it or some other problem he had to overcome? We had this discussion a
few years ago it seems like. ...Cliff?
Troy Maynor
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of Bob Jacobsen
Subject: Re: Europa-List: roll trim tab and servo installation
Fred,
Many of us have had excellent luck using model airplane servos mounted in
the ailerons. I mounted mine after the ailerons were built but before
filling etc.
You can see pictures of an installation at www.galaxyhobby.com/europa.htm
If you have specific questions just e-mail me. All the parts required -
including servo driver, servo, linkages etc come to about $100 - cheaper and
faster than most other methods, plus it's almost totally hidden. Any good
hobby shop should have what you need.
Bob Jacobsen
A131
>From: "Fred R. Klein" <fklein@orcasonline.com>
>Reply-To: europa-list@matronics.com
>To: <europa-list@matronics.com>
>Subject: Europa-List: roll trim tab and servo installation
>Date: Mon, 10 Nov 2003 16:23:28 -0800
>
>
>Hi All,
>
>I'm familiar with the desireability of incorporating roll trim in the XS.
>
>Can someone point me to an info source for a tried and true installation?
>
>When is the optimal time to install it?..my sense would be after the
>ailerons have been trial fitted to the wings (but what do I know?).
>
>Fred, A194
>
>
|