No - to do this right you should remove item, add or subtract, then replace.
That should circumvent the problem, if you have it, but it will take more
time. I was just lucky getting a free set of 0.001g accuracy scales as a
replacement. No need identified there to take the long-winded process of
removal and replacement.
Regards,
Jeremy
Jeremy Davey
Europa Monowheel 537M G-EZZA
Tail done
Standard XS wings awaiting mods and closing
CM ready for installation in fuse (with airbrakes fittings), but holding off
while I do a load of small jobs first
1100 build hours to date
Intended fit:
Rotax 914 turbo, Airmaster CS fully-feathering prop
Lots of lights, buttons, switches, gizmos, and alarms
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Paul Sweeting
Subject: RE: Europa-List: Faulty scales
But do now recall in my chemistry days being taught to always take the item
off and then place back on the balance after addition or subtraction..
So the correct method to overcome this would be to add a drop or two, then
take cup off balance and place back on, before adding more??
Cheers
Paul..
p.s surely you mean ISO A4 not A4..... i.e 297mm X 210mm not 11.?" x 8.?"
- how do I know the difference, lots of very expensive pre-printed cheques
that didnt quite line up........
-----Original Message-----
From: Jeremy Davey [mailto:jeremycrdavey@btinternet.com]
Subject: Europa-List: Faulty scales
<jeremycrdavey@btinternet.com>
You may remember a thread some weeks ago started by Ron Parigoris about
problems with digital scales that ignored any very small, very slow
increments in weight? His test involved weighing a piece of Letter paper,
then tearing it up and reweighing it, putting the pieces on very slowly.
After a long search for a piece of Letter-sized paper to undertake the test
(we use A4 over here) I tried it and, to my surprise, my scales failed!
The contents of this email and any attachments are sent for the personal
attention
of the addressee(s) only and may be confidential. If you are not the
intended
addressee, any use, disclosure or copying of this email and any attachments
is
unauthorised - please notify the sender by return and delete the message.
Any
representations or commitments expressed in this email are subject to
contract.
ntl Group Limited
|