RE: Europa-List: Wing spar pins ?

[Peter Zutrauen <peterz@zutrasoft.com>]

John Wrote:

Hi Mike ,
I initially used the PIP pin and the bolt/Allen wrench pin which were supplied.
After some time and some struggles with the PIP pin due to a snug fit and not
much to get hold of, I changed to two bolt/Allen wrench pins since they are much
easier to insert and remove.
Cheers, John
N262WF, mono XS, 912S


Isn't the Pip-pin functionality 
required to keep the spars together on the port side?

Cheers,
Pete
A239