One of mine was similar to what you describe. I moved the bellcrank away
---From the spar by a couple mm by making a plate of alum for the bracket
assembly, drilled for the four bolts. I drilled lightening holes in the
plate also. I suppose you could use washers. Ask the factory.
Kevin, still filling and sanding...
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of
EuropaXSA276@aol.com
Subject: Europa-List: Wing lateral push rod HELP!
Moving along through chapter eight I have just completed my lateral push
rod.
A test fit indicates that the thing binds in many areas. My observations
are
that I would have to substantially widen the wing rib holes and even then I
expect the push rod to be directly against the spar with unacceptable or no
clearance. Any suggested fix?
Thanks
Brian Skelly
|