Europa-List: Tire to wheel assembly

[Kenneth Gresham <kgresham@mtco.com>]

The 2 main wheel inner tubes came with 1chrome and 1 brass nut ana a chrome 
washer
each. On one the brass nut and washer was tight against the tube with the
other loose. On the other both nuts were in the stem with the washer between.
What is the correct orientation and location of these parts? How does the valve
stem lay inside the wheel? I see no drawings or description in the manual. This
should be so easy, but I don't want to mess things up. Thanks.

Ken Gresham
A268 Wings rigged, doing flap extensions, and gear