>
Me too.... I spoke to Andy about it and he suggested that it was due
to incomplete bleeding. Having re bled several times I have found that
the lever returns to the off position quite smartly immediately after
bleeding but a day or so later the old problem has returned. So I have
come to the conclusion that my seals are damaged. Probably my fault for
not following the advice about not operating the lever without fluid in
the system :-( . Anyway I assume that either the factory or Aircrft
Spruce can supply seals when I eventually get around to replacing them.
BTW I am not flying yet and it is a job high on the list to be done
before I do.
Paul Atkinson
>
> I have had a lot of trouble with the piston only returning very slowly
> to
> the maximum back position. Like Karl I have tried my best with
> cleaning and
> lubricating to fix it but with only partial success. It is nice to
> hear
> that Karl may have found a solution and it would be a great help if he
> would
> give us the details of the replacement seals.
>
>
> Ian Rickard #505 G-IANI
> Europa Club Assistant Mods Rep
> e-mail mods@europaclub.org.uk
>
|