Hi all,
For what its worth, if I was doing this over again I would research
alternative methods to pulling in the module than screws. I did hear
mention on an idea once where people suspended the lower half and used
weights on the cockpit module. I don't know how successful this was but
what I found that the filling and sanding of the holes was not a trivial
exercise.
The problem is several areas of the fuselage where I used sheet metal screws
were compound curves and the screw actually pulled the area flat. When it
came time for me to fill this I it took quite sometime to try and get the
shape correct and I had many spots like this to fix.
Paul
|