Mike wrote:
> Found some marvellous fixings for the fuel tubing yesterday at B&Q's
> i.e. Home Depot) - twin plastic 12mm pipe clamps with a central
> securing screw hole. I roughened them up and reduxed them to the
> floor of the tunnel but they could be bolted in.
They may have to bolted, if they don't pass a "yank" test after a couple
weeks cure. Always has seemed to me that it's an odd plastic which will
permanently stick to epoxy. Alternatively, the adhesive foam-backed version
of these type clamps can be affixed by first plopping down a little puddle of
wettish flox, covered by a piece of stiff, clear plastic like the stuff used
for retail packaging. After cure, there remains a flat, glossy
surface, and the adhesive foam will definitely adhere.
Regards,
Fred F.
|